Tools for moulding. Centring sleeves Ingestion-build-117251 Inclusion of the technical content

Inclusion of the technical content of IEC/PAS 61076-2-108

the brake temperature is the control item during the fade sections

pipe grip gas pliers and duckbill pliers

that will support combustion of small vertical test specimens under specified test conditions

This method covers the measurement of soluble uranium isotopes in water in activity concentrations between approximately 2·10−3 Bq/kg and 10 Bq/kg when analysing a 1 l test sample volume with a 60 000 s counting time with a typical alpha LSC instrument

Tools for moulding. Centring sleeves Ingestion-build-117251 Inclusion of the technical content1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, for centring sleeves intended to be used for locating the spacing blocks in relation to the fixed clamp plates in moulds. It gives indications concerning materials and hardness, and specifies the designation of centring sleeves which meet the requirements of this International Standard.