Fe: SrTiO3 (110) 5x3x0.5mm, 1sp, ( Fe doped 0.01 wt %) GaN

Fe: SrTiO3 (110) 5x3x0.5mm, 1sp, ( Fe doped 0.01 wt %) GaNSingle crystal SrTiO3 doped with 0. 01% Fe Size: 5mm x 3mm x 0. 5mm Orientation: (110) + 0. 5 o Polish: one side polished. Surface finish( RMS or ra): <5 A Please email us to check availability of 0. 01 wt% Fe doped SrTiO3 Typical Physical Properties Crystal Structure Cubic, a=3. 905 A Fe doping 0. 01 wt% Growth Method Vernuil Density 5. 175 g cm3 Melt Point 2080 oC Hardness 6 ( Mohn) Thermal expansion 10. 4 (x10 6 oC) Resistivity Loss Tangent at 10

you should firstly groove it by  MSK-500 and then crimp it by MSK-510 Grooved by MSK-500

Li Yang for their contributions and findings in this test

Mechanical Grade

Packing:               1000 class clean room in a single wafer container

DNP-ALF300: Width 400 mm ± 0

01 wt% Fe doped SrTiO3

Packing:            In vacuum bag

the bottom cylinder (piston) in the cross-section illustration in the dimension section below Operation Temperature 10 - 40°C Dimensions

Click the video below to see how to heat seal the tab onto the pouch cell case after the welding:

Air permeability

Precaution:   R plane sapphire wafer is easy to cleave compared with C plane's

you must check the substrate by XRD before growing the film