PTK7308 Plywood Servo Mounting frame flying wing

PTK7308 Plywood Servo Mounting frame flying wingLightweight Poplar plywood servo mounting frame for the PTK7308 servo Laser cut 2. 8mm Poplar plywood. Supplied as a pack of 2 servo frames How To Mount Wing Servos Using Ply Frames 1. Glue a strip of 3mm (or 1 8) balsa to the leading edge of the mount (width dependant on the distance the mount is likely to be behind the main spar). 2. Place the mount with the servo in situ in the wing and abut it against the rear of the main spar. 3. Slide the mount

resulting in a lightweight final product with a structural weight of only 1

Model features:

Magnets for the Hatch Catch

The new v3 kit integrates ingenious use of 3D printed parts into the lightweight balsa / carbon tube structure

Balsa Sheet Fin

Losing altitude quickly is best done by holding the model in a tight turn with some down elevator in

Monitor voltage and temperature during use

These Kavan modelling pins feature an extra-fine needle that glides into wood without damage

1/20 scale

Power Pack Includes

Printed in PETG filament with structural ribs designed into the one piece

Download the Instructions HERE