Bambu Lab AMS 2 Pro Air Inlet Unit lifting assembly

Bambu Lab AMS 2 Pro Air Inlet Unit lifting assemblyOverview The AMS 2 Pro has two active inlet and outlet air vent, with the bottom one as the inlet and the rear one as the outlet. The dampers in the Inlet (side wall) Unit and Outlet (bottom) Unit assemblies are identical, differing only in cable length. When drying the filament, AMS 2 Pro will discharge moisture from the inside through external circulation. When performing external circulation, the air inlet and outlet will be opened. Please ensure

In the Box For Hotend Heating Assembly - Right

VRAM: 6GB or more

Color Gray Materials Plastic

Product Name:

please use a large dry box

Increasing heat resistance

- Silicone glue 2g * 1

This retro-fit set may also replace the following product:

Recommended drying condition is 50 ℃ for 8 hours in a blast drying oven

PowerSpec 3D Pro

5S / MK3S Upgrade Kit – Strip Reusable Parts

A vast majority of materials can be printed without a separation layer (e