Bulkhead Terminal 200A with Cap (Pair with Pos & Neg) double

Bulkhead Terminal 200A with Cap (Pair with Pos & Neg) double

you will need to reconfigure the voltage points mentioned above to Start charge at 27V and Stop charge at 26

Cell Balancer

16v 500F dimension: 380mm x 65 x 185H

Charger Included : LiFePo4 Charger 12V 10A (14

com/100003790405871/videos/2150414898428169/

7kgTerminal Type M8Terminal Torque 80~100 in-lbs(9~11Nm)Case Material ABSEnclosure Protection IP65Chemistry LiFePO4Warranty 5 Years CHARGE SPECIFICATIONSRecommended Charge Current <50AMaximum Charge Current 100ARecommended Charge Voltage 28

Spare prop and pin to suit our 28lb Motor

These fit into the 8 inch hatch commonly found on Hobie kayaks

– Stainless Steel Fasteners

Energy: 2816Wh

Capacitors can be connected in series to achieve a higher voltage

Same thing applies for 24v system (16v +16v =32v is needed)