ATC Canopy Repair Crown Assembly 1.75OD

ATC Canopy Repair Crown Assembly 1.75ODThis reinforcement assembly is a perfect solution to repair damage to the crown area of your ATC Canopy or ATC Indiana Canopy top. The four patch assembly can be glued with HH 66 cement or welded with either a RF bar welder or handheld hot air welder. The construction is of dual layer opaque laminated vinyl and covered polyester webbing. The center ring is constructed of stainless steel.

The XL Rolling Canopy Jack 13'8"h is built for frame systems with leg height between 9'0" and 12'0"

083" wall thickness

This kedered aluminum tubing is used as a rafter in the Jumbotrac 30' wide frame tent system on the hip end only

The bag is constructed from 14oz translucent white vinyl

Used to anchor in finished concrete slab

With a header bar (sold separately) this door can also be utilized on most pole supported tents

safety equipment

The Single Canopy Door Set (L) is an economical product to add a functional egress point to most any frame tent or frame structure

This cable is used on 20' wide traditional frame tents to keep the eave framing from bulging outward from the weight of the upper rafter framework

The top section of the pole is fitted with a zinc plated steel top pin

The assembly has a breaking strength of 3

and is highly resistant to temperature and weather extremes