S/R Chassis OEM Rear LCA Spherical bearing upgrade (set of 4) Handbrake Extenders

S/R Chassis OEM Rear LCA Spherical bearing upgrade (set of 4) Handbrake ExtendersWant to reduce bush deflection and change out your tired OEM rear LCA bushes? Well, we have made replacements, however, they are a spherical bushing rather then a polyurethane or rubber bushing to significanty reduce bush deflection and ensure a much smoother operation throughout the range of suspension travel. The GKTECH Spherical bush replacements are a direct replacement of the OEM bushes and utilize a PTFE lined spherical bearings that are readily

- NOW AVAILABLE: OEM swaybar U brackets are now available

Fits both LHD and RHD variants

in-line INLET 7/16-20 OUTLET

Even with the addition of our V4 high clearance caster rods

a guide on this can be seen HERE

NOTE: On SUPER low cars running the 20mm risers your axles may then come into contact with the rear upper camber arm and or subframe which must be notched accordingly

it is a direct replacement clutch fan to suit RB

After selling over 10

Diff bush removal spares

washers etc are supplied

0mm Fairlady Z Z32 All Models 14

V3 and V4 Rear camber arms (SKU = REAR-CMBR and STRT-CMBR)