Suspension Kit Swingarm 28-1075 YZ250 '88-'92 Model_Shinko SR568 Scooter Tyre

Suspension Kit Swingarm 28-1075 YZ250 '88-'92 Model_Shinko SR568 Scooter TyreOne kit does it all! All of the bearings, seals, shafts*, bushings, thrust bearings (if required) in one all inclusive kit to do the job correctly and completely. All bearing shafts manufactured with 52100 bearing steel that is hardened and centerless ground for a precision fit and extended wear life. All steel spacers are case hardened and plated for resistance to wear and corrosion. Needle thrust bearings have been replaced with Teflon bearings.

Length: 365mm

Yamaha FJR1300A 13- Engine R&G

The Whites Exhaust Wrap is a 50mm wide 5-metre roll

This means three lubrication pools to protect against high-speed abrasion

Heavy Duty springs* (*some kits now include diaphragm springs as used on many larger new bikes)

For use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds

Wires length: 320 mm & 235 mm

Enduro ventilation

this exhaust is sure to take your Monster 797 or Scrambler 800 to the next performance level

Flash Point: 78°C

SR712 SERIES

Next attach the Red wire (+) to the pin closest to the centre of the socket and the Black wire (-) to the pin closest to the edge of the socket (see picture)